PAGE 25
PAGE 24
6. OPERATION - STARTING THE ENGINE
1. Pour fuel into the fuel tank and tighten the cap securely.
2. Rest the unit on a flat, firm place. Keep the cutting head
off the ground and clear of surrounding objects as it will
start moving upon starting of the engine.
3. Push the primer several times until overflow fuel flows out
in the clear tube.
(A) Primer
(B) Clear tube
(A) Choke lever
(B) Open
(C) Close
4. When the engine is cool, move the choke lever to the
closed position.
6. OPERATION - STARTING THE ENGINE
(A) Throttle trigger
(B) Stop switch
(C) Run
(D) Stop
5. Set the ignition switch to the “RUN” position. Release the
throttle trigger and make sure it is fully back.
6. While holding the unit firmly, pull out the starter rope
quickly until engine fires.
7. Move the choke lever downward to open the choke and
restart engine.
8. Move the choke lever downward to open the choke and
restart engine.
Avoid pulling the rope to its end or returning it by releasing
the knob. Such actions can cause starter failures.
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850