PAGE 3
PAGE 2
1. Housing cover
2. Pressure vessel
3. Wheel
4. Supporting foot
5. Quick-lock coupling
6. Pressure gauge
7. Pressure regulator
8. ON/OFF Switch
9. Transport handle
10. Safety valve
11. Drainage screw for
condensation
MAIN COMPONENTS
WARNING SYMBOLS
READ THIS INSTRUCTION MANUAL CARE-
FULLY BEFORE OPERATING OR ADJUSTING
THE COMPRESSOR.
Risk of electric shock. The compressor must
be disconnected from the mains supply before
maintenance or removing any covers. Do not
use in a damp environment.
Risk of accidental start-up. The compressor
could start automatically in the event of a
power cut and subsequent reset. Do not carry
the compressor while it is connected to the
power source, or when the tank is filled with
compressed air.
This compressor contains surfaces which may
reach a high temperature during operation.
Never operate with the motor housing re-
moved.
Air and condensation water can burst from the
compressor when the drain plug is removed.
Wear a safety goggles and ear protectors
when using this compressor.
This compressor produces a high sound level
during operation. Ear protection should be
worn.
Model
SC24M
Power
1.2kW / 1.6HP
Voltage
220-240 V @ 50 Hz
Motor Poles
2 P
Rated Speed
3450 rpm
Delivery
8 bar
Discharge Pressure
6.3 cfm
Tank Capacity
24 L
Net Weight
15.5 kg
Noise Specification
LWA 97dB
WWW.SGS-ENGINEERING.COM
