O2
Oxygen co-
ncentration
Oxygen
Minute
Oxygen
flow
!
Cumulat-
ive time
Power
supply
Anion
Installation and Operation
07
08
Catchment use (sold separately)
Oxygen inhaler
Outlet E
Household oxygen bar outlet
Gas port B
Note that there is the
inlet end of the catheter
Highest water line
Put one end of the first conduit to the sump plug inlet port B (with the inlet
conduit, as difference) A is inserted into the other end connected to the ox-
ygen outlet household oxygen bar, and finally the end of the oxygen duct
plug to the integrated water heater outlet E.
When the water level inside the catchment exceeds the maximum water lev-
el D, please promptly drained the water to avoid water back into the oxygen
tube.
Rmote control use
With a dedicated remote control, this product gets the remote control align-
ment infrared receiver hole of oxygen machine panel.
When you find the remote control operation insensitive and cannot operate,
you must check the remote control battery whether it fully charged first; re-
mote control can't be too far from the host computer, otherwise it will lead
to the remote control operation insensitive.
Infrared receiver
The oxygen machine has smooth appearance, glossy, please prevent the
sharp scratch it.
Please turn off the oxygen machine after finishing the timer and the air s-
upply, and unplug the power in time.
The cotton filters on the host side change in time, if the cotton filters we-
re blocked by the dirty stuff, it will have an effect on oxygen.
Attention:
Please don't take apart the machine by yourself, avoid unnecessary dam-
age inside the machine, before cleaning and maintaining, oxygen machine
must be cut off the power.
1.Routine maintenance
2.Handle of long idle
Starting up, let the oxygen machine work for thirty minutes, then wait for
it to cool by natural.
Cut off the power, replace the oxygen machine into the box.
Remote control can't install battery while sealing, in order to prevent the
battery leakage to damage the remote control.
Pls wrap and seal the main engine with plastic bags to prevent air humidity
cause the machine performance degradation.
Remove the wet cup, drain the water out of the cup and replace host comp-
uter after air-dry.
The maintenance of wet cup:
In order to ensure the cleaning of the wet cup, the injection should be pu-
re water or boiled water, and try to replace every day, we suggest users c-
leaning the wet cup once a week
Air filter maintenance:
The main function of the air filter is filter and adsorption the dust and im-
purity, a long time will form a blockage in turn affect the intake of oxygen
machine oxygen effect.
It will become intake block for a long time, thereby, have an effect on the
oxygen machine; generally, replaced once a quarter, if it has much dust,
recommend replacing every two months.
3.Parts maintenance
Maintenance
Содержание Household Oxygen Bar
Страница 10: ...13 ISO13485...
