TVC-TRF-10-AAT
14
© SGS electronic 2006-2021
3.1.7
Channel 7 turn model off / change model
Case the model is switched off by leaving the neutral position, the model stops
running when channels 1 to 5 are controlled and the engine off sound is played.
This feature can be used to play the engine start/stop sound by the RC. But
it can be used to switch between up to three different models. To achieve
that, the appropriate model must be switched on, when the channel 7 switch is
positioned in a unique position. The module stores this position as „turn on“
position. When the switch leaves this position, the model becomes passive and
can not be moved. However, in this state it can still be fired by other tanks and
the model reacts by rumbling, hit indicator and incrementing the hit counter. To
do this you need receivers with the same channel crystals. When using 2.4GHz
receivers, they must be bound to the same transmitter.
Using this channel is optional.
3.1.8
Channel 8 Controlling the volume
If this channel is connected to a receiver, volume is controlled using this RC
channel. Otherwise the volume is controlled with Trimmer P1.
chan-
nel
plug
op-
tional
ra-
dio
1
2
3
1
X50
no
StickS steering
steering
turret rotation
2
X51
no
StickS throttle
throttle
gun elevation
3
X52
no
StickS cannon
eleva-
tion,
tracking
radar, elevation
and firing
cannon
eleva-
tion,
tracking
radar,elevation
and firing
tracking radar,
elevation
and
firing
4
X53
no
StickS turret
rota-
tion,
azimuth
tracking radar
turret
rota-
tion,
azimuth
tracking radar
azimuth track-
ing radar
5
X54
yes
TSMS
light mode control / search radar control
6
X55
yes
TSMS
control mode selection
7
X56
yes
TSS
model select
8
X57
yes
Pot
volume control
Table 1: Overview control channels. abbrevations refer to table 6 on page 34.
