SGM Q?7, Руководство пользователя

Страница: 16 / 40

16
Using stand-alone operation
Stand-alone operation is where the fixture is not connected to a control device, but is preprogrammed with a series of
up to 24 scenes, that play continuously in a loop. Up to three stand-alone programs can be defined and run from the
menus, and one of the programs can be set to run by default whenever the fixture is started.
Each of the three available stand-alone programs contains 24 user-defineable scenes, each scene with its own RGBW
(or white) and shutter settings. Each scene has a defineable fade-in time, for the transition from one color (or white) to
the next, and a wait (static) time, each of up to 999 minutes and 59 seconds in duration. To program a stand-alone
program, use the “Manual
→ Editor” menus (see “Control menu” on page 26).
Stand-alone mode at fixture startup is enabled using the
“Settings
→ Startup mode → Select startup mode → Standalone” menu. The
program to be run is selected using “Settings → Startup mode → Startup
program” menu (see “Control menu” on page 26“ for a description of the
menus). The chosen program will run its length cyclically whenever the
fixture is powered on.
A program can be run at any time by selecting it using the “Manual → Run
program” menu.
Manual_Q7-Q7W_Rev.2_170x113,3.book Page 16 Thursday, May 22, 2014 12:38 PM