GB
SGM Technology for lighting
Palco Series
- 27 -
User’s Manual 1.03
W
IRELESS
Palco 5 with the DMX Wireless connection as standard. It uses atechnology based on the idea of GSM, with a
radius over 500 meters. It has been widely tested in environments with WiFi, bluetooth, GPRS-UMTS signals,
with excellent results.
To enable the wireless communication proceed as follows
:
Palco 5 has two menu for the: 1-WIRELESS LOG OFF and 2-WIRELESS
.
The procedure to activate the wireless communication is very easy
:
1.
Enter the LOGOFF menu and confirm the SET option. This function
disables all the communications previously activated
2.
Set the WIRELS menu on ON. This will enable a new communication
.
3.
Press the LOG key on the Transmitter to connect the receiver located on
the fixture
.
W
IRELESS
L
OGOFF
This function allos to disable all the wireless communication previously
activated.
To enable the LOGOFF, proceed as follows
:
1.
Connect Palco 5 to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “WIRELESS LOGOFF” menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to confirm the SET option.
5.
At this point Palco 5 is set for a WIRELESS communication
W
IRELESS EXIT
This function enables or disables the wireless signal output on DMX OUT
port:
1.
Connect Palco 5 to the power supply; wait until the reset operations are
completed.
2.
the UP/DOWN keys, select the menu "W_EXIT".
3.
Press the "Enter" key to confirm the selection. The words on the display
will start to flash.
4.
Using the UP/DOWN keys, select ON if you want to enable the output of
the wireless signal on the DMX OUT port, or select OFF if you want to
confirm the SET option.
W_EXIT
LOGOFF
WIRELS
