17
Ceiling mount bracket
Accessories
The ceiling mount bracket lets the fixture replace the base unit and to be mounted directly to a surface. Also, it supports the ability to
be hung with 1/4-turn omega bracket.
The ceiling mount is fitted directly to the head and offers a very low installation height.
When using ceiling mount there are two options for powering the fixture:
1.
Power from an external 36V power supply.
2.
Use an SGM G-4 extension cable, that connects the base to the ceiling mount.
Contact your SGM dealer, or [email protected], for more information about the extension cable.
Overview
The G-4 Series can be used with different types of accessories, such as the ceiling mount bracket, Top Hat, and different
interchangeable front lens. To know more about all the available G-4 Series accessories, please see www.sgmlight.com, or contact
your local SGM dealer.
Apart from the ceiling mount, tophat, and interchangeable front lens, there are no other user-serviceable components in the fixture.
Do not open other parts in the G-4 series, as doing so might damage the ingress protection.
Contact your SGM dealer if the fixture operates abnormally, is defective, or needs any kind of service and repair.
Removing the head from the base
First of all, ensure that the fixture is not connected to AC power.
While powered off, start over by removing the base of the fixture in order to
install the ceiling mount. This is easily done in three steps:
1.
Remove the four screws that is tightening the bracket against the
base.
2.
Pull out the head from the base with a firm grip in one single go.
3.
Detach the bracket from the head by loosening the four screws (not
shown).
NB! Keep in mind when removing the head from the base that it is possible
to get dust and water into the fixture’s connector housing. Carefully
ensure that the rubber sealing ( O-ring ) is not damaged, and there is no
contaminants after removing the base.
A: Remove four screws
B: Remove the head.
C: Remove Bracket
1
3
2
A: ISO View
B: Front view
C: Back view
D: Right side view
E: Top view
A
E
B
D
Measurements in millimeters
C
Figure 11: Ceiling mount bracket
Figure 12: Removing head from the base
