15
Level 1
Level 2
Level 3
Level 4
Function
INFO
Firmware Version
-
Display installed firmware version.
Serial Number
-
Display SGM serial# for Fixture and LED
DMX View
-
Display received DMX levels. Press ‘UP or ‘DOWN’ to scroll through the 1 - 512
channels.
Sensors
Main Board
Display the sensors of the fixture.
Head Board
Barndoor
LED Temperature
Pan Angle
Tilt Angle
Wireless Signal Strength
Wireless Paired
Mains voltage
Humidity
Light PWM
Errors
-
Displays the errors detected.
Timers
-
Display total LED running hours Red, Green, Blue, Amber, Mint 1, Mint 2.
SETTINGS
Wireless DMX
Log Off
Press ‘ENTER’ to log off wireless DMX.
Status
Signal Strength
Display the signal strength % of the connection.
CRMX Paird
Display CRMX Paird: YES or NO.
DMX Active
Display DMX Active: YES or NO.
Display Flip
[X] / [ ]
Press ‘ENTER’ to enable / disable - [X] / [ ].
Display Off
[X] / [ ]
Press ‘ENTER’ to enable / disable - [X] / [ ].
Factory Default
-
Resets the fixture to factory default. See “Factory default” on page 14
.
Service PIN
-
Service use only.
Contact your SGM dealer or SGM support to request the service pin.
Service Menu
-
Service use only.
TEST
Automated test
-
Initiates a self-test sequence. Press ‘ESC’ to stop self-test sequence.
LED test
-
Service use only.
Display Test
-
Service use only.
RESET
-
-
Press enter to reset fixture.
MANUAL
Run Program
-
Select program 1 through 8. See “Internal programs” on page 13
.
Stop Program
-
Stop any running program.
Store Position
-
Store position 1 through 9. See how in “Pan / tilt positions” on page 11
.
Control menu
