SGC Smartuner SG-235 Скачать руководство пользователя страница 9

Страница: 9 / 87

¥ A tuner placed at the transmitter loads up the feedline as well as

the antenna (so that the feedline radiates).

¥ A coupler installed at the antenna eliminates feed line losses by

providing a proper match of the antenna to the feed line. The

Smartuner is a true antenna coupler.

We will emphasize these key points throughout this manual to yield the best

possible operation of your Smartuner. These include:

¥ The coupler must be located at the antenna.

¥ No coax may be connected to the coupler output.

¥ The coupler must have clean 12 VDC power supplied to it.

¥ The ground system must always be larger than the antenna.

¥ The antenna wire should be of the largest gauge practical.

¥ Capacitance at the coupler output must be minimal.

¥ The antenna must be of sufficient length for your lowest operating

frequency.

Strictly observing these basic rules will ensure good operations under the

widest range of conditions.

SG-235 Manual

SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA 98005 USA

P.O. Box 3526, 98009 Fax: 425-746-6384 Tel: 425- 746-6310 or 1-800-259 7331

E-mail: [email protected] Web site: http://www.sgcworld.com

PLEASE MAKE NOTE OF THE FOLLOWING INFORMATION FOR YOUR RECORDS:

Date unit was Purchased: _______/_______/_______

Dealer from whom purchased: ____________________________

Date installed: _______/_______/_______

Type of antenna used: ___________________________________

Содержание Smartuner SG-235
























































































Результаты поиска

Содержание Smartuner SG-235

Отзывы:

SGC Smartuner SG-235, Инструкция по установке и эксплуатации, Страница: 9 / 87

Результаты поиска

Содержание Smartuner SG-235

Отзывы: