
36
S G - 2 3 5 c o u p l e r i s s p e c i f i c a l l y d e s i g n e d t o b e u s e d f o r s u c h
applications.
9.
For vehicular installation, do not use any inexpensive CB antennas
and/or mounts. These antennas will not perform well between 1.8 to
10 MHz even though the coupler will load and tune the antenna whip.
A very high voltage of 15 to 30,000 volts RF will be applied to the
antenna depending on the RF power level and frequency. The
inexpensive ball mounts for CB antennas are not designed for this
stringent a purpose. The use of an antenna system, such as the
SG-303, is highly recommended as it was specifically designed for
extreme applications.
6
6..1
1
S
ST
TE
EP
PS
S T
TO
O A
AN
NT
TE
EN
NN
NA
A IIN
NS
ST
TA
AL
LL
LA
AT
TIIO
ON
N
System installation is a three part process covering the following steps:
a)
Selection and installation of the antenna
b)
Mounting the antenna tuner
c )
Connecting the appropriate interface cables between the tuner and
the transceiver
This manual section will discuss the three steps mentioned above in detail
and will provide sufficient information to enable the user to confidently
install a complete system properly.
The antenna system is a key part of the communication system and for satis-
factory operation the system must be carefully selected, then installed cor-
rectly. The unbalanced antennas used with the automatic antenna tuner use
the ground (counterpoise) as half of the antenna system. The ground forms
an "image" antenna and is a critical part of the system. It is essential to con-
sider both the ground and the antenna when designing the system installa-
tion.
6
6..2
2
A
An
ntte
en
nn
na
a L
Lo
oc
ca
attiio
on
n
The figures in Section 4 illustrate several different antenna installations.
The following points should be carefully considered when designing the
antenna system.
1.
The antenna should be located in a position free of obstructions,
particularly in the desired direction of communication.
SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA 98005 USA
P.O. Box 3526, 98009 Fax: 425-746-6384 Tel: 425- 746-6310 or 1-800-259 7331
E-mail: [email protected] Web site: http://www.sgcworld.com
© 1998 SGC Inc
SG-235 Manual