21
8) Connect the Z-bend in the 450mm
throttle pushrod to the outer hole of the
thottle servo arm.
COWLING.
1) Tape the cowl to the fuselage using
low-tack tape.
2) Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drill-
ing each hole.
3) Tape a piece of card stock to the fuse-
lage to indicate the location of the muf-
flr, needle valve, and any other items
that may require access when the cowl
is mounted. Slide the cowl on the fuse-
lage, and transfer these locations onto the
cowl. Use a drill, rotary tool and sanding
drum to make any cut-outs in the cowl
before securing it to the fuselage.
