SG GROUP GENERGY LIMITED1000I, Инструкция по эксплуатации

Страница: 42 / 84

Po
rt
uguê
s
Englis
h
Es
pa
ñol
Po
rt
uguê
s
Englis
h
Es
pa
ñol
40
Remember that is a security system in case of a
critical level, it is not an indicator of lack of oil
IMPORTANT: This alarm system only works when the level of oil is not enough,
no protecting in case of an inadequate oil or an oil in poor conditions.
Central pilot: Generator overload
If the generator is overloaded, the indicator turns on, at the same time turns off the
230V output indicator (lower pilot). In this case, the generator will keep running,
but the voltage output will be cut off
In case of overload, follow the steps below:
1. Disconnect the equipment from the generator.
2. Press the
RESET button in the main panel.
3. Connect other equipment which power consumption is less than the rated
power performed by the generator.
NOTE: A dirty air filter reduces the maximum power of the generator, so
always keep the air filter in good condition.
Lower pilot: Correct running
Turns on after the generator starts and it means the normal running with the 230V
output.