Features
The iono module's key features are:
✓
12/24Vdc or 12/18Vac power supply
✓
4 multi-mode inputs: either to be used as digital or as 0÷10V or 0÷20mA analog
signals
✓
2 digital inputs for potential-free contacts
✓
1 analog output 0÷10V controlled by PWM signal
✓
redundancy of common terminals for simplified wiring
✓
6 power relay outputs rated for 12A at 250V, which can tolerate large peak currents
(inrush current) up to 80A
✓
output relays with bistable coil, to minimize the
current consumption
✓
built in slot for the installation of an Arduino Uno or Arduino Ethernet boards, leaving
the USB or Ethernet connector accessible
✓
1 terminal block with asynchronous communication port (TX / RX) at TTL level
✓
removable terminal blocks for easier installation
✓
inputs protected against electrostatic discharges and temporary over voltages
✓
doubled internal insulation between high voltage areas (relay outputs) and all other
components
✓
compliance with Electromagnetic Compatibility and Electrical Safety standard
✓
standard modular housing 9 units size, suitable for mounting on Omega rail.
4
Hardware Guide
