Be sure to always remove the power supply before installing or
removing the Arduino board inside iono.
iono must be operated with both side covers installed.
Follow all applicable electrical safety standards, guidelines,
specifications and regulations for installation, wiring and operations of
iono modules.
Carefully and fully read this iono hardware guide before installation.
iono is not authorised for use in safety-critical applications where a failure of the product
would reasonably be expected to cause personal injury or death. Safety-critical
applications include, without limitation, life support devices and systems, equipment or
systems for the operation of nuclear facilities and weapons systems. iono is neither
designed nor intended for use in military or aerospace applications or environments and
for automotive applications or environment. Customer acknowledges and agrees that any
such use of iono is solely at Customer's risk, and that Customer is solely responsible for
compliance with all legal and regulatory requirements in connection with such use.
Sfera Labs, a division of Home Systems Consulting S.p.A., may make changes to
specifications and product descriptions at any time, without notice. The product information
on the web site or materials is subject to change without notice.
Please download and read the iono Terms and Conditions document available at:
http://www.sferalabs.cc
iono and Sfera Labs are trademarks of Home Systems Consulting SpA. Other brands and
names may be claimed as the property of others.
Copyright © 2015-2016 Home Systems Consulting SpA. All rights reserved.
2
Hardware Guide
