background image

2

SAFETY AND GENERAL INFORMATION

Save these instructions. 

For your safety, read, understand, and follow the information provided with and on this 

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics 

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use 

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read 

to and discussed with the operator in the operator's native language, making sure that the operator comprehends 

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this 

device, remove from service immediately. 

Inspect before each use.

 Do not use if abnormal conditions such as cracked welds, damaged, loose or missing 

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall 

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an 

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact 

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be 

made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer. 

PRODUCT DESCRIPTION

This Hydraulic Service Jack is designed to lift, but not support, one end of a vehicle. Immediately after lifting, loads 

must be supported by a pair of appropriately rated jack stands. This Rapid Lift service jack has a unique feature that 

provides fast, no load lifts to the jacking point, at which time it lifts in approximately 1/4" ~ 3/4" increments.

WARNING:  

Never use a hydraulic jack as a stand-alone device. After lifting, immediately support the lifted 

vehicle with a pair of appropriately rated jack stands.

SPECIFICATIONS

Model

Capacity

Jack Dimensions (L x W x H) Min. Height

Max. Height

Saddle Size

AL2301

3 Tons

32-5/8" x 15-1/2" x 7-1/8"

5"

22-7/8"

6-3/4"

 

!

•  Study, understand, and follow all instructions 

before operating this device.

•  Do not exceed rated capacity.
•  Use only on hard, level surface.
•  Lifting device only. Immediately after lifting, 

support the vehicle with appropriate means.

•  Do not move or dolly the vehicle while on the 

jack.

•  Lift only on areas of the vehicle as specified by 

the vehicle manufacturer.

•  No alterations shall be made to this product.
•  Failure to heed these markings may result in 

personal injury and/or property damage.

To avoid crushing and related injuries:
• Never work on, under or around a load supported 

only by hydraulic jack.

• Always use a pair of adequately rated jack stands.
• Chock each unlifted tire in both directions.
• Do not use this device to lift, level, lower, support nor 

move a house, mobile home, travel trailer, camper 

or any building structure.

• Be alert and sober when using this product. Do not 

operate under the influence of drugs or alcohol.

WARNING

!

   

WARNING

!

   

Содержание AMERICAN LIFTING AL2301

























Отзывы: