Seypos DT6800, Руководство по настройке

Страница: 87 / 165

82
INTERLEAVED 2 OF 5 (ITF)
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below,
and select an Interleaved 2 of 5 length from the following pages.
< Enable Interleaved 2 of 5 >
Disable Interleaved 2 of 5
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for I 2 of 5
to any length, one or two discrete lengths, or lengths within a specific range.

One Discrete Length - Select this option to decode only I 2 of 5
symbols containing a selected length. Select the length using the
numeric bar codes in
Appendix D, Numeric Bar Codes . For
example, to decode only I 2 of 5 symbols with 14 characters, scan I
2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct
an error or to change the selection, scan Cancel barcode.

Two Discrete Lengths - Select this option to decode only I 2 of 5
symbols containing either of two selected lengths. Select lengths
using the numeric bar codes in
Appendix D, Numeric Bar Codes .
For example, to decode only those I 2 of 5 symbols containing
either 2 or 14 characters, select I 2 of 5 - Two Discrete Lengths,
then scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan Cancel barcode.