Page 2
Please note!
To make the device operate always reliably, please follow the advice
below:
-
Do not open the chassis (risk of electric shocks!).
-
Avoid dust and too much humidity, direct sunlight or too low or high
temperatures.
-
Pay attention to ventilate the backside properly.
-
Do not transport the device until 10 minutes of cooling down, avoid
dropping, or rough handling (tubes!).
-
Place the device always on a stable and horizontal underlay.
-
Avoid operation close to running radiators.
-
Pay attention not to let fluids enter the device.
-
Do not run the device without a speaker connected.
-
After switching on, the tubes need about half a minute to warm up –
the full performance is reached not until a few minutes.
-
Please replace the tubes with those of the same type only.
-
Always run the device with an undamaged power cord and make
sure that you choose the appropriate input voltage (115V/230V).
-
Run the device with grounded circuits only.
Please let the device be checked by a skilled technician if
-
the power cord is damaged.
-
objects or fluids entered the device.
-
the device was exposed to excessive moisture.
-
you determine weird action.
-
the device was dropped or the chassis is damaged.
