background image

 

 

Page 1

 

Preface 

 

Dear harmonica player, 
 
Many thanks for your confidence in buying the SEYDEL 

Hyperamp HA1510 REV 

MK II

The Hyperamp developed together with SEYDEL and tube-amp engineers of the 
Haller-Amps factory (www.haller-amps.com) situated close to Klingenthal is an 
uncompromising, hand wired tube-amp, equipped with all the features a 
harmonica player would need.  
 
The 

Hyperamp HA1510 REV MK II

 is offering special features that are not 

found with other amplifier models. For the second version (Mark II) we changed 
technical details according to suggestions of many Hyperamp MK I users: 
 
1) The 

Gain/Volume control 

now allows to produce the beloved warm and 

beefy Chicago sound already at lower volumes – low or high-impedance 
microphones can be used and the “crunch“ can be adjusted individually.  
 
2) The new 

AUX-IN input 

on the front panel can be connected to any mp3-

player or other sound sources. So it is easily possible to play along to your 
famous tracks without additional Hifi-equipment.  
 
3) A 

built-in stand/pedestal at the bottom-front can be used to angle up 

the amp

: therefore the player can hear his playing better and the overall sound 

projection is largely improved.  
 
4) The built-in 

spring reverb is tube-driven 

as well resulting in an authentic 

vintage style reverb for the authentic Chicago Blues sound.  
 
5) 

Line-Out or additional external speaker

? Both is possible – so the new 

Hyperamp MK II can be used on any stage no matter how small or large it is.  

Many amps originally are built for electric guitar or bass – in contrast the 
Hyperamp is designed from the ground up specifically for the needs of the 
harmonica player! That is why the special sound is created, that once helped our 
small instrument to become "the mother of the band" (Otis Spann, piano player 
of the Muddy Waters Band).  

Many players are looking for their individual sound - with the adaptability for 
different kind of microphones/effects and speaker combinations the Hyperamp is 
a unique and universal voice for the harmonica player.  

Have much fun with the SEYDEL-

Hyperamp HA1510 REV MK II

 – we can help 

you to find another piece of 

your

 sound! 

With our best thanks! 

The SEYDEL-team 

Содержание Cass Hyper amp II YF 1510 REV












Отзывы: