Sewha si 4500 Скачать руководство пользователя страница 51

Страница: 51 / 52

DIGITAL WEIGHING INDICATOR

SI 4500

- 60 -

7-4. Indicator Test mode

Through this “Test Mode”, you can check basic conditions of Indicator.

This Test consists with total 7 tests.

7-4-1. Enter “Test Mode”

Press

key for 4sec, then display will show “F-Test”.

Under this display, press No.2 key and enter the “Test Mode”.

Under “Test Mode”, please choose each test and check the basic conditions of Indicator.

If you want to exit from each “Test Mode”, press

key.

7-4-2. Test Mode

Test Mode

Contents

Test 1.

Analogue

Value Test

Under “TEST” display, press No.1 key and Enter “TEST1” mode.

Under this mode, you can check the A/D value.

If the A/D value is close to 520,000, or there is no change although pressing or

loading some force on/in weighing part, please check load cell, load cell, cable,

connecter, A/D board.

Test 2.

Key test

Under “TEST” display, press No.2 key and Enter “TEST2” mode.

Press each key, and check the pressed key is operated.

Test 3.

Output Relay Test

Under “TEST” display, press No.3 key and Enter “TEST3” mode.

This Test will be operated automatically from Relay1 to Relay6.

※

This test will operate automatically, so please remove all materials in/on

weighing parts.

If you can not remove materials, please remove relay terminals.

Test 4.

External Input

Test

Under “TEST” display, press No.4 key and Enter “TEST4” mode.

If you press External input S/W, the External S/W No. will be displayed.

If the S/W No. is not displayed, please check connecting condition.

Test 5.

Communication

Test

(Com. Port 1)

Under “TEST” display, press No.5 key and Enter “TEST5” mode.

After connecting No.2 and 3 pin of 9pin connector, you can test communication

condition, like TXD or RXD/TXD.

If there is an error in communication, “232-Err” will be displayed with 3times

buzzer sound. The communication is working properly, “232Pass” will be

displayed with one time buzzer sound.

Test 6.

Communication

Test

(Com. Port 2)

Under “TEST” display, press No.6 key and Enter “TEST6” mode.

After connecting No.2 and 3 pin of 9pin connector, you can test communication

condition, like TXD or RXD/TXD.

If there is an error in communication, “232-Err” will be displayed with 3times

buzzer sound. The communication is working properly, “232Pass” will be

displayed with one time buzzer sound.

Test 7.

BCD IN Test

This test is for “BCD Input”.

If you install “BCD IN” option card, you can test this option card operation

through this Test mode.

Test 8.

BCD OUT

This test if for “BCD out”

Through this test mode, you can check operation of BCD output.

Содержание si 4500





















































Результаты поиска

Содержание si 4500

Отзывы:

Бренды по названию

Популярные бренды

Sewha si 4500, Руководство по эксплуатации

Результаты поиска

Содержание si 4500

Отзывы:

Бренды по названию

Популярные бренды