14
3 Operation
3.1.5
Differences between measuring mode and settings mode
The device is operated in two modes:
●
Measuring mode
(see
)
Measurements are taken in measuring mode. All functions
needed to take readings can be accessed from one menu.
●
Settings
(see
)
The device settings can be changed in settings mode. Infor-
mation about the device can also be retrieved. Measurements
cannot be taken in settings mode.
Settings are accessed via the menu in measuring mode. The
settings are access-protected by a PIN code.
A
CAUTION!
The device only issues alarms in measuring mode. As
soon you access the menu, alarms are no longer triggered.
3.2
Measuring mode
When switched on (see Section 3.1.3 on page 11
) the device
is in measuring mode. In measuring mode, the current measure-
ments are always displayed (see Fig. 5
). Depending on the ap
-
plication, the measurement will have to be saved or started and
then stopped (see Section 3.2.8 on page 21
).
