91
Appendix
13.2
Inspection protocol
Inspection protocol
EX-TEC® GM 4 / OD 4
Sensor (e.g. CO):
test gas conc. (e.g. 40 ppm CO):
display tolerance zero point (e.g. -3 – +3 ppm)
(Display tolerances according to
display tolerance test gas (e.g. 27 – 33 ppm)
chapter 5.4 of operating instruction)
Serial no. (e.g. 062 01 0001):
22.07.2008
1.0 Device status
1.1 - status correct (e.g.: Y / N)
1.2 - remaining operating hours (e.g.: 5 h)
2.0 Pump test
2.1 - fault F 100 when sealing
2.2 - pump filter changed (e.g.: Y / N)
3.0 Display accuracy
3.1 - display (zero point)
- within tolerance (e.g.: Y / N)
3.2 - display (test gas)
- within tolerance (e.g.: Y / N)
4.0 AL 1 alarm triggering
4.1 optical alarm (e.g.: Y / N)
4.2 audible alarm (e.g.: Y / N)
5.0 Observations
- housing broken
- adjustment, repair
- factory inspection
- or the like
6.0 Test
- day
- month
- year
- signature
