SEW-Eurodrive MOVIPRO PHE10A 3 A-00 Series, Руководство по пересмотру

Страница: 7 / 36

2
Device structure
Function units
Revision – MOVIPRO
®
PHE10A-..-3..A-00..
7
2.3 Function units
2.3.1 Communication and control unit
The function module consists of the following internal elements.
Fieldbus interface
Depending on the design, one of the following communication options is available:
Ethernet
The device is equipped with a UDP-capable Ethernet interface for connection to the
fieldbus. The fieldbus is connected via plug connectors.
For further information, refer to chapter "Electrical connections" (→ 2 11).
WLAN
NOTICE
Damage to the radio modem due to missing terminating resistors.
Damage to the radio modem.
• Connect a 50 Ω terminating resistor to those antenna ports that are not in use.
The MOVIPRO
®
device has a "Radio Ethernet Client 5 GHz" (REC5) radio modem for
connection to a wireless infrastructure network. It can be used for the frequency
blocks 2.4 GHz (IEEE 802.11b/g) and 5 GHz (IEEE 802.11a).
The radio connection is designed for communication with the higher-level controller.
The MOVIPRO
®
device is accessible as a terminal in the network.
For more information, technical data and certifications, refer to the following docu-
mentation: "MOVIPRO
®
REC5 Radio Modem" addendum to the operating instructions.
23541253/EN – 05/2017