SEW-Eurodrive MGFAT1-DSM-C/PE Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 124

SEW-Eurodrive MGFAT1-DSM-C/PE Скачать руководство пользователя страница 81

9

Technical data and dimension sheets

Conformity

Operating Instructions – MOVIGEAR

®

classic

81

9

Technical data and dimension sheets

9.1

Conformity

9.1.1

CE marking

•

Low voltage directive:

The

MOVIGEAR

®

drive system fulfills the regulations of the Low Voltage Directive

2014/35/EU.

•

Electromagnetic compatibility (EMC):

The  units  are  designed  for  use  as  components  for  installation  in  machinery  and
systems.  They  comply  with  the  EMC  product  standard  EN  61800-3  "Variable-
speed  electrical  drives".  Provided  that  the  installation  notes  are  followed,  the  re-
quirements for CE marking of the entire machine/system equipped with these units
on  the  basis  of  the  EMC  Directive  2014/30/EU  are  met.  For  detailed  information
about  EMC-compliant  installation,  refer  to  the  publication  "Electromagnetic  Com-
patibility in Drive Technology" from SEW‑EURODRIVE.

The CE mark on the nameplate represents conformity with the Low Voltage Direct-
ive 2014/35/EU and the EMC Directive 2014/30/EU.

9.1.2

Recognized Component Mark

The Recognized Component Mark on the nameplate indicates compliance with the
Canadian and US-American requirements, checked by UL (Underwriters Laboratory).

9.1.3

EAC

The

MOVIGEAR

®

unit series fulfills the requirements of the technical regulations of the

Customs Union of Russia, Kazakhstan, and Belarus.

The EAC marking on the nameplate certifies the conformity with the safety require-
ments of the Custom Union.

9.1.4

UkrSEPRO (Ukrainian Certification of Products)

013

The UkrSEPRO marking on the nameplate certifies adherence to the technical regula-
tions of Ukraine for the MOVIGEAR

®

unit series.

25805134/EN – 07/2018

«
...
79
80
81
82
83
...
»

Содержание MGFAT1-DSM-C/PE





























































































































Отзывы:

Нет отзывов