9
Technical data and dimension sheets
Design notes for gear units with hollow shaft and key
Operating Instructions – MOVIGEAR
®
classic
102
9.12.3
2. Assembly/disassembly kit
You can also use the optional assembly/disassembly kit for mounting. You can order
the kit for the specific size by quoting the part numbers in the table below. The scope
of delivery includes:
•
Spacer tube for installation without contact shoulder [5]
•
Retaining screw for assembly [2]
•
Forcing washer for disassembly [7]
•
Fixed nut for disassembly [8]
The short retaining screw delivered as standard is not required.
Customer shaft
•
The installation length of the customer shaft must be L8.
Do not use the spacer
tube
if the customer shaft
has a contact shoulder [A]
.
•
The installation length of the customer shaft must be L8. Use the spacer tube if the
customer shaft
has a contact shoulder [B]
.
[1]
Hollow shaft
[2]
Retaining screw with washer
[3]
Retaining ring
[4]
Customer shaft
[5]
Spacer tube
25805134/EN – 07/2018