SEW-Eurodrive DFS 56L/B, Руководство по эксплуатации

Страница: 13 / 36

DFS/DFY Synchronous Motors
13
Electrical Connection 3
• Twisted pair cable with shield connected at both ends over as large an area as possible.
• Clip on with strain relief clamps (over as large an area as possible).
• The socket contacts are implemented as crimp contacts. Use only suitable crimping tools for
crimping.
• Strip insulation off lead wires over length A (see Appendix, Table 1). Pull shrink sleeve over
connections.
• Remove incorrectly mounted socket contacts with suitable removal tools only.
• Secure plug connector with coupling ring.
Pin Connection Core
10 GND
supply
contact separation from housing BN
7 V
S
+ 13 ... 15 ... 24 V
DC
, polarized WH
14 Data+
data output, serial
high = “1” (positive logic) BK
17 Data– high = “0” VT
8 Pulse+
Takt, Stromschleife
7 mA in direction pulse+ = “1” PK
9 Pulse– 7 mA in direction pulse– = “0” GY