11
Installation Guide
Note 1: Make sure correct connection of power supply jack
If this unit is intended to use +12/24V power supply provided via ACC route, please make
sure the red wire is correctly connected with the ACC ignition for proper system operations.
If external power supply (including the power supply from cigarette lighter jack) is used,
please short the red wire to yellow wire first, and then connect to +12/+24V power terminal.
Note 2 : Special Feature for Driving Safety Control
For driving safety considerations, video output “Front” that intends to be connected to the
monitor installed in the dashboard will be enabled only when the brake is pulled high. Monitors
installed for back-seat passengers are, however, operable anytime.
Note 3 : Automatic switch of the reversing CCD
This car-use DVB-T receiver can also be integrated with the reversing CCD applications.
That is, when the shift gear is in the “Reverse” position, monitors will be automatically switched to
show picture from the reversing CCD that intends to be connected to external A/V input (i.e.AV1)
of this unit.