SEVERIN MW 9718, Инструкция по эксплуатации

Страница: 27 / 176

1. Turn the rotary control anti-clockwise until the display shows 09 .
2. Press to confirm the programme selection.
3. Turn the rotary control
until the display shows 5:00 .
4. Press the rotary control to start the defrost programme.
Helpful notes:
– Four beep signals indicate that 2/3 of the programmed defrosting time has elapsed. Turn the
food over, taking out any that is already defrosted. Press the rotary control
to continue the
programme.
– Should the food not be completely defrosted after the pre-set defrosting time has elapsed, it is
advisable to limit any further defrosting times to 1-minute periods until the food is fully
defrosted.
– Food stored in plastic containers that are not suitable for use in microwave ovens should be left
for a while after being taken from the freezer. Wait until the food can be easily detached from the
plastic, before it is put into the oven inside a container suitable for use with microwave ovens.
Automatic cooking programmes
These programmes are helpful when cooking or heating up food without having to select any
particular settings, e.g. for power or cooking time.
1. Select the desired programme from the table below.
2. Turn the rotary control
anti-clockwise until the display shows 01 to 09 .
3. Use the button to select the desired weight.
4. Press the rotary control to start the programme.
The display shows the selected programme running time.
Menu Weight Display
01
Potatoes
230 g 1
460 g 2
690 g 3
02
Beverages
200 ml 1
400 ml 2
600 ml 3
03
Popcorn
99 g 99
04
Heating up
200 g 200
300 g 300
400 g 400
500 g 500
600 g 600
700 g 700
800 g 800
27