SEVERIN MW 7848, Инструкция по эксплуатации

Страница: 22 / 162

Setting the clock:
Once the unit has been connected to the power supply, the display shows 0:00 and an
acoustic signal is heard.
Note: The time display does not start counting, unless the clock has been set. The time
setting process can be cancelled by pressing the key.
The clock must be set when the appliance is connected for the first time, and also if a power
failure has reset the clock.
1. Press once or twice to select the 24- or 12-hour display. The display shows 24H or
12H .
2. Turn the rotary control to set the correct hour. The hour must be in the range 0-23
(for 24H) or 1-12 (for 12H).
3. Press . The minute digits start flashing.
4. Turn the rotary control to set the correct minutes. The range must be
0-59 .
5. Press to finish setting the time. The symbol ‘ : ’ flashes and the correct time is
shown.
The microwave function
To programme the unit for cooking, the correct mode (microwave), the required power
setting and the cooking time must be selected, before the programme sequence can be
started. The power setting is selected by repeatedly pressing . The cooking time can be
pre-set to a maximum of 95 minutes.
Power settings
Power (P) Display Type
1 x 900W P100 (100%) High Heating up liquids, cooking
2 x 720W P 80 (80%) Medium high Defrosting and heating up deep-frozen dishes
3 x 450W P 50 (50%) Medium Cooking delicate food
4 x 270W P 30 (30%) Defrosting Defrosting
5 x 90W P 10 (10%) Low Defrosting delicate food
Example: to programme the microwave function for a cooking time of 5 minutes at 50%
power.
1. Press 3 times. The display shows P 50 and .
2. Press to confirm the microwave function.
3. Turn the rotary control until the display shows
5:00 .
4. Press . The symbol starts flashing on the display.
Note: The following steps are used for setting the cooking time:
0 - 1 minute : 5-second steps
1 - 5 minutes : 10-second steps
5 - 10 minutes : 30-second steps
10 - 30 minutes : 1-minute steps
30 - 95 minutes : 5-minute steps
The grill function
The grilling process uses radiation heat to process the food. This programme is suitable for
cooking 'au gratin' or for grilling thin pieces of meat.
Select the desired grilling time. The grilling time can be pre-set to a maximum of 95 minutes.
The power setting of the grill function cannot be changed. As the meat needs to be turned
22