6
Installation
IMPORTANT: THIS PRODUCT MUST BE MOUNTED TO CONCRETE, STONE, BRICK OR WOOD STUDS. The wall
must be able to support five times the weight of the television and the mount combined. A professional
installer or structural engineer should inspect or verify the requirements of the wall.
2. Locate studs and mark the wall
All hole locations must be centered on wood studs.
Verify the center of the studs using an edge-to-
edge stud finder. Level the template on the wall and
mark four hole locations in the template slots (2
top and 2 bottom) with a pencil on the wall.
For TV sizes 65” and larger, mark and utilize six
fasteners instead of four.
IMPORTANT:
HANDLE THE TV IN A VERTICAL POSITION TO AVOID DAMAGE TO THE
SCREEN. IF PLACING THE TV SCREEN-SIDE DOWN OR LEANING AGAINST A WALL DURING
INSTALLATION, COVER THE SCREEN WITH A PROTECTIVE CLOTH OR BLANKET.
Step 1: Hang the Mounting Plate
Wood stud wall mounting:
See page 8 for mounting to concrete, stone or brick
1. Choose mounting location
If mounting a Séura Outdoor TV, reference
page 14
for measurements from the edges of the TV to the
edges of the mounting template to properly place the template in the desired location on the wall. Note
that it is NOT vertically centered on the TV screen.
