11
Step 3: Hang the TV
IMPORTANT: NEVER TRY TO HANG A TV BY YOURSELF. ALWAYS
USE AT LEAST TWO PEOPLE TO LIFT THE TV INTO PLACE.
This section requires two people.
that the top and bottom hooks of both mounting
brackets are securely seated on the upper and
lower mounting rails of the wall panel.
mounting rails on the wall panel.
the wall.
Connect the top and bottom mounting brackets to
the rails of the wall plate.
Attaching the Flat Panel to the Wall Plate
This section assumes that you have read and
understood these sections:
●
Selecting the Proper Mounting Hardware
●
Universal Washer Installation
●
Universal Spacer Installation
surface.
1.
2.
3.
4.
1.
2.
3.
Identify the number and location of the thread
Align the holes on each mounting bracket with the
inserting a minimum of two (2) screws per bracket.
Do not overtighten the mounting hardware.
Proceed to the “Attaching the Flat Panel to the Wall
Plate” section.
Attaching the Mounting Bracket to the Flat Panel
26
1
4
"
20
5
16
" 11
7
16
"
25mm
1"
5
5
8
"
7"
1
15
16
"
1. Lift the TV and bring the back of the TV
towards the wall, positioning it slightly
above the mounting plate.
2. Lower the TV to hook the bottom hooks of
the Tilt Mount TV Brackets on the lower rail
of the mounting plate.
3. Bring the top of the TV closer to the wall
to hook the top hooks of the Tilt Mount TV
Brackets on the top rail of the mounting
plate.
4. Make sure the bottom and top rails are fully
engaged.
Do not let go of the TV until you are certain
that the top and bottom hooks of both
mounting brackets are securely engaged on
the upper and lower mounting rails of the
mounting plate.
