9
Installation
Refer to the included custom drawing package for specific dimensions
and instructions for your custom product.
1. Verify that the wall is prepared appropriately. If the product is an in-
wall, or “Recessed” configuration, verify the dimensions of the rough
opening.
2. Install power supply. Various options are available and shown on
“Sheet 3” of the included drawing package.
3. Install mounting brackets according to the dimensions and instructions
shown on “Sheet 4” of the included drawing package. Ensure mounting
brackets are securely fastened using wood framing members where
possible.
NOTE:
Take care when moving the product. Always transport the product
with at least two people.
WARNING:
Always transport the product in a vertical position. Moving
the product in an unsupported horizontal position may result in product
flex or damage.
4. Connect power supplies and audio/video components.
• It is strongly recommended to test all electrical and electronic
devices to verify proper integration and functionality before
securely mounting it to the wall.
5. Position mirror display close to wall surface and securely engage
mounting brackets.
• Allow for a ¼" ventilation gap for proper air flow and heat transfer.
6. Check to ensure the mirror display is fully engaged and secure to the
mounting brackets.
7. Reference the appropriate electronics manual for mirror display
operating instructions.
NOTE:
All Séura drawing packages indicate generalized nominal residential wood framing construction, and are not indicative of any particular building
code. It is the installers responsibility that all electrical, audio/visual, and framing construction are code compliant to the municipality in which the
product is being installed. Modifications made to Séura recommendations are at the sole discretion of the installer and release Séura of all liability.
Revised Date
www.seura.com
1.800.95.SEURA
PH. 920.857.9069
FAX 920.857.9490
49"
32"
412"
40"
412"
4
3 4
"
4
3 4
"
22
1 2
"
A
46" Monitor
Viewable
Screen
1" Lift-Off Clearance Required
2716"
278"
1"
1
16
"
3
16
"
DETAIL A
SCALE 1 : 2
Mirror-Polished Stainless
Steel Glass-Mounting Clip
Sales Order / Inv. Number
Item and Description
Reseller
SHEET 1
SIGNATURE
AND DATE
REQUIRED
DATE:
SIGNATURE:
NOTE:
PLEASE SIGN AND DATE THIS PAGE BEFORE RETURNING TO SEURA. ONLY THIS PAGE NEEDS TO BE
RETURNED. BY RETURNING THIS SHEET, YOU ARE AGREEING TO ALL DIMENSIONS SHOWN ON ALL DRAWING
SHEETS. FOR CUSTOM UNITS, WE WILL NOT START THE BUILD PROCESS WITHOUT AN AUTHORIZED SIGNATURE.
FOR DRAWINGS THAT REQUIRE REVISIONS: SEND THE REVISIONS TO SEURA ON THE ORIGINAL DRAWINGS.
DO NOT SIGN UNTIL ALL REQUIRED DIMENSIONS ARE VERIFIED AND ACCEPTED.
AFTER THE DRAWINGS ARE UPDATED, A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.
DIMENSIONS ARE IN INCHES
TOLERANCES
FRACTIONAL 1/8 [3mm]
ANGULAR: MACH 1.0
ANGULAR: BEND 1.0
TWO PLACE DECIMAL .03 [.8mm]
THREE PLACE DECIMAL .015 [.4mm]
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
Date Created
N/A
S-S-4932-46.S1-PR-NI
49" (W) X 32" (H) Standard Surface-Mounted TV Mirror with 46" TV and Premier Glass
so46S1S
-
Removable Side Panel
A/V & Power
Connections
(By Others)
Low Voltage
Power Supply
Mounting Surface
Low Voltage Input
Mirror-Polished Stainless
Steel Glass-Mounting Clip
SIDE VIEW DETAIL
SCALE 1:3
Removable
Side Panel
Mirror Face
Interface Plate
Interlocking Brackets
46.S1 HIGH-DEFINITION MONITOR SPECIFICATIONS
Display Type
TFT Thin Film Transistor
Backlight
LED
Active Screen Area WxH
40.08” (W) x 22.56” (H)
Picture Format
16:9
Physical Resolution
1920 x 1080
Horizontal Viewing Angle
Typical (Total) 176° (Left: 88° / Right: 88°)
Vertical Viewing Angle
Typical (Total) 176° (Up: 88° / Down: 88°)
Brightness
450 cd/m²
Contrast
Typical 5000:1
Response Time
6ms
OSD Language
Deutsch, English, Español, Français, Italiano, Português, 中文
Video
HDMI™
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Component (YPbPr/YCbCr)
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Audio Input
Line Level
Audio Output
Speaker Output 2 x 8W RMS & 8Ω per channel
Input Ports
Line Audio Input
1 x RCA terminal, white, red
Component Input
3 x RCA terminal, red, green, blue
HDMI Input
3 x HDMI terminal
USB
1 x USB terminal
RS232
1 x D-SUB 9pin male
IR Input (Infrared)
1 x mini jack 3.5mm
Output Ports
Speaker Output
1 x Phoenix clip 4pin
IR Output (Cable)
1 x mini jack 3.5mm
IR Output (LED)
1 x mini jack 2.5mm
Power Consumption
DC 24V │ 74W / 3.1A
SHEET
2
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
DIMENSIONS ARE IN INCHES
TOLERANCES
FRACTIONAL 1/8 [3mm]
ANGULAR: MACH 1.0
ANGULAR: BEND 1.0
TWO PLACE DECIMAL .03 [.8mm]
THREE PLACE DECIMAL .015 [.4mm]
N/A
Date Created
so46S1S
Sales Order / Inv. Number
S-S-4932-46.S1-PR-NI
Item
Revised Date
OPTION C
Power Supply
Mounted in Wall Cavity
Power Supply Must
be Accessible
Wall Cavity Must Not
Contain Insulation.
Area Around Power Supply
Must be Open for Proper
Cooling.
OPTION A
Power Supply Mounted
Behind Mirror
Mounting Surface
Mirror Mounting
Brackets
In-Wall
Flat Panel
TV Box
Power Supply
OPTION B
Power Supply
Mounted at A/V Rack
or Other Remote Location
Mounting Surface
Power Supply
Mounted Remotely
Mirror Surface
POWER SUPPLY MOUNTING OPTIONS
Typical Installations Shown
*To Field Fabricate Low-Voltage Extension Cable:
Connector 1 = NEUTRIK NC4FX
Connector 2 = NEUTRIK NC4MX
14 AWG Minimum Wire Size
Pins 1 & 2, Positive
Pins 3 & 4, Negative
Low Voltage Extension Cable
25-ft and 50-ft Options Available
Cable May Be Field Fabricated
Parts Included with Mirror
PART
IMAGE
DIMENSIONS
POWER
SUPPLY,
SP10135
1.9 X 3.3 X 6.8 INCHES
(CASE ONLY)
LOW VOLTAGE 8-FT CABLE
HIGH VOLTAGE 8-FT CABLE
MOUNTING
BRACKET,
MV80072
2.0 X 3.4 X 8.5 INCHES
2.5mm
PLUG -
3.5mm
SOCKET
ADAPTER,
SP10145
50.3mm X 10.7mm
Optional Parts (Sold Separately)
DESCRIPTION
PART
NUMBER
IMAGE
DIMENSIONS
25-FT EXTENSION
CABLE*
SP10141
.33 CABLE,
25-FT LONG
WITH
CONNECTORS
ATTACHED,
.81 MAX
50-FT EXTENSION
CABLE*
SP10142
.33 CABLE,
50-FT LONG
WITH
CONNECTORS
ATTACHED,
.81 MAX
IN-WALL FLAT
PANEL TV BOX FOR
RETROFIT
INSTALLATION
SEURA,
SP10143
CHIEF,
PAC511
16.9 X 18.4 X 3.5
INCHES
MOUNTING HOLE
14-1/2 (W) X
15-3/4 (H)
IN-WALL FLAT
PANEL TV BOX FOR
NEW
CONSTRUCTION
SEURA,
SP10144
CHIEF,
PAC516
14.5 X 15.5 X 3.5
INCHES
SPEAKER TO LINE-
LEVEL ADAPTER
SEURA,
SP10146
PYLE LINK,
PLVHL60
3.6 X 2.6 X 1.08
INCHES
SHEET
3
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
DIMENSIONS ARE IN INCHES
TOLERANCES
FRACTIONAL 1/8 [3mm]
ANGULAR: MACH 1.0
ANGULAR: BEND 1.0
TWO PLACE DECIMAL .03 [.8mm]
THREE PLACE DECIMAL .015 [.4mm]
N/A
Date Created
so46S1S
Sales Order / Inv. Number
S-S-4932-46.S1-PR-NI
Item
Revised Date
