20
If the product is not working properly, please check the following troubleshooting hints before you contact customer service:
Symptoms
Possible Solution
Blank screen
Check the status LED. If the status LED is red, the Mirror Display is in standby and the monitor is black, this is normal. If
the status LED is green and the monitor is black, the Mirror Display might perform an input scan with no available signal.
Please check if an input source is available and that the port of the device has been connected correctly in the Service
Settings/ Input Ports menu. Press “Menu” on your remote control: you should see the OSD menu. Check your settings for
misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore the Mirror Display to its default
settings. If the problem still exists contact customer service.
Color defects
Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged.
The image is
unsatisfactory
Adjust the picture characteristics as described in the above-mentioned section “Image Settings”. Image is not stable
Check that the display resolution and frequency from your media source is compatible with the Mirror Display.
Error message:
“No Signal”
Check that the connected media sources are switched on. Check that the signal cable connector is properly connected
and that the connection pins are not bent or damaged. Press “Menu” on your remote control: you should see the OSD
menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore
the Mirror Display to its default settings. If the problem still exists contact customer service.
Low or no sound
Press “Volume Up” and/or “Volume Down” on your remote control and check the audio connection cable(s). Make sure
that the Volume Limit setting in the Service Settings menu has been set to an audible value.
Remote control
doesn’t work
Press a button on the remote control and check that the status LED of the Mirror Display flashes briefly. If it doesn´t,
replace the batteries of the remote control with new ones.
NOTE: If the above troubleshooting hints do not help you to find a solution, please contact Séura.
Features
32"
42"
46"
55"
65"
Display Backlight
TFT Thin Film Transistor | LED Backlight
Active Screen Area
W x H
27.48" x 15.47"
36.61" x 20.59"
40.12" x 22.56"
47.60" x 26.77"
56.22" x 31.61"
Diagonal
31.5"
42.0"
46.0"
54.6"
64.53"
Picture Format
16:9
Physical Resolution
1920 x 1080
Viewing Angle
Horizontal
Typical (Total) 178°
(Left: 89° / Right: 89°)
Vertical
Typical (Total) 178°
(Up: 89° / Down: 89°)
Horizontal
Typical (Total) 178°
(Left: 89° / Right: 89°)
Vertical
Typical (Total) 178°
(Up: 89° / Down: 89°)
Horizontal
Typical (Total) 176°
(Left: 88° / Right: 88°)
Vertical
Typical (Total) 176°
(Up: 88° / Down: 88°)
Horizontal
Typical (Total) 176°
(Left: 88° / Right: 88°)
Vertical
Typical (Total) 176°
(Up: 88° / Down: 88°)
Horizontal
Typical (Total) 178°
(Left: 89° / Right: 89°)
Vertical
Typical (Total) 178°
(Up: 89° / Down: 89°)
Brightness
450 cd/m2
450 cd/m2
450 cd/m2
450 cd/m2
360 cd/m2
Contrast
Typical 4000:1
Typical 4000:1
Typical 5000:1
Typical 4000:1
Typical 4000:1
Response Time
8ms
6.5ms
6ms
4.5ms
5.5ms
Power Consumption
DC 24V
80.88W / 3.37A
DC 24V
110.64W / 4.61A
DC 24V
74.40W / 3.10A
DC 24V
194.4W / 8.10A
DC 24V
576W / 24A
Weight
(Monitor Only, does
not include Mirror or
Metal Housing)
23.8 lbs
36.6 lbs
49.6 lbs
63.1 lbs
125.9 lbs
Operating
Temperature
32° to 122° Fahrenheit
Humidity
20 - 80% RH, Non-Condensing
OSD Languages
Deutsch, English, Español, Français, Italiano, Português,
Certification
UL 60950-1 , CAN / CSA 22.2 - 60950-1, CE, FCC, EN 60950-1, EMC 55022, EN 6100-3-2
NOTE: Above specification may be changed without prior notification for quality improvement.
Troubleshooting
Technical Features
