Séura IW T-19.5 IW T-27.5, Руководство пользователя

Страница: 19 / 24

19
If the product is not working properly, please check the following troubleshooting hints before you contact customer service:
Symptoms Possible Solution
Blank screen
Check the status LED. If the status LED is red, the Television is in standby and the monitor is black, this is normal. If the
status LED is green and the monitor is black, the Television might perform an input scan with no available signal. Please
check if an input source is available and that the port of the device has been connected correctly in the Service Settings/
Input Ports menu. Press “Menu” on your remote control: you should see the OSD menu. Check your settings for miscon-
figurations and adjust accordingly. Alternatively, perform a factory reset to restore the Television to its default settings. If
the problem still exists contact customer service.
Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged.
The image is
unsatisfactory
Adjust the picture characteristics as described in the above-mentioned section “Video Settings”. Image is not stable
Check that the display resolution and frequency from your media source is compatible with the Television.
Error message:
“No Signal”
Check that the connected media sources are switched on. Check that the signal cable connector is properly connected
and that the connection pins are not bent or damaged. Press “Menu” on your remote control: you should see the OSD
menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore
the Television to its default settings. If the problem still exists contact customer service.
Low or no sound
Press “Volume Up” and/or “Volume Down” on your remote control and check the audio connection cable(s). Make sure
that the Volume Limit setting in the Service Settings menu has been set to an audible value.
Remote control
doesn’t work
Press a button on the remote control and check that the status LED of the Television flashes briefly. If it doesn´t, replace
the batteries of the remote control.
NOTE: If the above troubleshooting hints do not help you to find a solution, please contact Séura.
Features 19" 27"
Display Backlight TFT Thin Film Transistor | LED Backlight
Active Screen Area W x H 21.54" x 18.23" 26.73" x 22.64"
Diagonal 19" 27.2"
Picture Format 16:10 16:9
Physical Resolution 1440 x 900 1920 x 1080
Viewing Angle
Horizontal
Typical (Total) 178°
(Left: 89° / Right: 89°)
Vertical
Typical (Total) 178°
(Up: 89° / Down: 89°)
Horizontal
Typical (Total) 176°
(Left: 88° / Right: 88°)
Vertical
Typical (Total) 176°
(Up: 88° / Down: 88°)
Brightness 450 cd/m2 450 cd/m2
Contrast Typical 4000:1 Typical 5000:1
Response Time 6.5ms 6ms
Power Consumption
DC 19V
40W / .333A DC 19V
50W / .417A
Operating Temperature 32° to 122° Fahrenheit
Humidity 20 - 80% RH, Non-Condensing
Certification CE, FCC
NOTE: Above specification may be changed without prior notification for quality improvement.
Troubleshooting
Technical Features