SEUIC Technologies Co,. Ltd.
Description of buzzer status
Indication
Prompt sequence of buzzer
Power on
Low/medium-//high beep
Barcode decoded
Medium beep
Transmission error detected; data ignored
4 long and low beeps
Parameters set successfully
High/low/high/low beep
Correct programming sequence executed
High/low beep
Incorrect programming sequence
Long and low/long and high beeps
Battery/PowerCap low battery
4 short and high beeps
Status of LED indicators
LED indicator
Description
Power indicator
Power indicator in green
51-100% power
Power indicator in yellow
21-50% power
Power indicator in red, indicating low battery
power
0-20% power
Flash in blue (fast/fast/slow)
Paging status
Press and hold the scan button for 3 seconds, and the indicator will show the battery power; it will
automatically go off within 5 seconds;
Scan indicator
Off
The barcode scanner is turned on and ready to
scan, but the scanner is not powered
Flashing in green
The barcode has been successfully decoded
Red
Transmission error (off by default)
Yellow
Communication failure
Troubleshooting
The wireless scanner does not work
The scanner is not powered
Check if the battery power is low
The wireless scanner successfully decodes the barcode, but fails to upload the data to the
host
The host interface is incorrectly configured
Scan the appropriate host interface setting code
The cable is loose
Make sure that all cable are securely connected
The wireless scanner is not paired with the
cradle
Scan the cradle pairing setting code to ensure
they are paired and connected properly
