12
ENGLISH
INFORMATION!
Before using the luminaire, protective foils and
transport protections should be removed.
For luminaires with integrated BATTERY
INFORMATION!
When delivered, the battery is partly charged.
Charging takes place after commissioning of the
luminaire. The full lighting duration is only available
after successful charging. Here, follow the specified
charging time in the technical data.
In order to be able to use the ALDEBARAN
®
SMART-
LINE for miscellaneous purposes (suspended lumi-
naire, mast luminaire), several optional accessories are
available for you:
a. Strap systems (suspended lamp)
b. Holding systems (suspended/ mast lamp)
Therefore, ask specifically for our accessories for
the ALDEBARAN
®
SMARTLINE.
ATTENTION!
Pay absolute attention to the information on the
socket (yellow label) which is located at the housing
side right next to the socket.
WARNING! Electric current!
Plug connectors with IP67 have a bayonet system.
For achieving this protection degree, twist the
bayonet rings until they are closed. Generally, only
a protection degree of IP44 is achieved when the
bayonet rings are not tightened (protection against
splash water and solid bodies from 1mm).
INFORMATION!
The additional socket can differ in type and version
from the version presented here. Country-specific
Schuko plug connectors, as well as plug connectors
according to IEC 60309 are possible.
By connecting the supply line to the supply network,
the luminaire is in operating state. For connecting
further electric devices, the Schuko socket mounted
into the cap is to be used.
In general, the luminaire is delivered ready for
connection with supply line and plug.
Supply line with moulded and / or mounted plug.
It is only to be connected to AC current – with voltage
according to the type plate – to a properly installed
Schuko socket (see picture).
Please note that the system should meets the relevant
VDE guidelines. If you have any questions concerning
this, please refer to your energy supplier or your
trained electrician.
Of course, we are at your disposal for further
information.
WARNING! Tripping hazard!
Lay the cables and supply lines in a way that no
tripping hazards occur and they are safe from
mechanical damages, like tearing or driving over.
Fix the cables, if necessary, with adhesive tape or
cable ties.
ATTENTION!
When using versions of the luminaire with other
plug connectors (not Schuko
®
), the voltage
according to the type plate has to be noticed.
Operation
Installation
(suspended/mast luminaire)
Commissioning
(Example)
