Seto Aldebaran XLD, Инструкция по эксплуатации

Страница: 12 / 16

12
ENGLISH
Adjusting the luminaire to the lighting situation
You can adjust the ALDEBARAN
®
XLD individually to
your lighting situation. For this purpose, the slip-on
filters are available.
a. with slip-on filter
This gives you the possibility to illuminate the
near area homogeneously.
b. without slip-on filter
Allows you to have better lighting in the dis
tance.
Control elements
(T) Carrying handle
(W) Bolt reception
(U) Slip-on filter
Operation
T
U
W
1. Installation for operation with stand / mast
systems
Connect the light with the bolt reception and
the stand / mast. Lock the
ALDEBARAN
®
XLD
with the star knob.
Electric connection:
Connect the power cord of the connection line to the
power outlet. The lamp is ready for operation when it
is connected to the power supply network.
2. Installation suspended operation
ATTENTION!
Always route the connection cable in such a way as
to avoid a risk of tripping! Observe the applicable
regulations for work safety!
ATTENTION!
The ALDEBARAN
®
XLD requires room / ambient
air for trouble-free operation. The luminaire must
be installed at least 0.5m away from all sides.
INFORMATION!
The luminaire can also be used in suspended
operation. This is only permissible in conjunc -
tion with the optional accessories ( item no.:
1410926011 ). For this, the ring nut must be
used as fastening.