Accessories
Accessories provided with this product are:
1.
User Manual
Introduction
These instructions detail the installation and operation requirements for the ST20
III & ST35III power supplies. These have been designed for operation in RV’s
providing a DC power system, with optional battery back up.
The units operate from 240Vac and provide an isolated 13.65Vdc output at 20A
and 35A respectively for powering the load and charging of batteries. All the
necessary protection and operating features for the load and batteries are
provided. An optional DC input is also provided to enable charging of batteries
and powering of the load from an ex13.8V DC power source.
The units are fully enclosed ready for direct wall mounting. All connections are at
the rear of unit providing convenient wiring and installation. User access to all
load and battery fusing has been provided from the front of the unit.
Operation
Safety:
Refer to the installation section before operating. Correct installation is
the most critical factor in ensuring the safe use of the power supply. If every
consideration of these instructions has been satisfied the power supply will be
safe to operate.
If the AC supply cord is damaged it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid hazard.
The unit is rated to charge a single 12V (up to 6 cells) lead acid battery at 100Ahr
Capacity.
5
