Keyboard Lock Menu (1.5)
Permits the user to lock the keyboard; by selecting YES
from the menu the keyboard becomes locked and on
the display there appears the phrase “SELECTOR:
UNLOCK KEYBOARD?”
In this situation it is not possible to change the
operation logic and move inside the selector menu.
To unlock the keyboard press the OK key and insert the
User Password.
Diagnostics Menu (2)
The Diagnostics menu is for reading only and permits the user
to have some information concerning the state of the control
centre:
For each event it is possible to set:
•
LOGIC SW VERS.:
indicates the software version
currently loaded in the microprocessor of the control centre.
•
SELECT SW VERS.:
indicates the software version
currently loaded in the microprocessor of the advanced
selector.
•
HW VERSION:
indicates the hardware version of the
control card.
•
NUMBER MANOEUVRES:
indicates the total number of
manoeuvres performed by the door from the moment in
which the centre left SESAMO. This value cannot be
zeroed. Manoeuvre is understood as a complete cycle of
opening and closing: a possible inversion increases the
number of manoeuvres.
•
BATTERY INTERV.:
indicates the number of times in
which the centre has been battery driven and thus the
number of blackouts of the external power source. This
value is zeroed each time that the maintenance is zeroed
(See Service Menu).
•
TOTAL BREAKDOWNS:
indicates the total number of
breakdowns. This value is zeroed each time that the
maintenance is zeroed (See Service Menu). Through the
connection with the PC it is possible to have the description
of the last thirty breakdowns that have occurred.
•
LAST BREAKDOWN:
indicates the code of the last
breakdown occurring on the system. This value is zeroed
each time that the maintenance is zeroed (See Service
Menu).
•
REGISTRATION N.:
indicates the registration number of
the control centre.
When Multi Slave mode is active, the operator - accessing the
setting menu - is asked to specify to which door, among those
connected to the selector, the successive commands will apply.
SESAMO srl
Str. Gabannone, 8/10 • 15030 Terruggia (AL) • Italy
Tel: +39 0142 403223 • Fax: +39 0142 403256 • www.sesamo.org • E-mail: [email protected]
MAN SAM - E 06-04