Servotronix CDHD-003, Быстрый старт

Страница: 50 / 66

Power Board 400/480 VAC CDHD
50 Quick Start Guide
4 Power Board 400/480 VAC
Overview
On all CDHD 400/480 VAC models, the power board has the following interfaces:
STO – P1
Logic Power 24 VDC – P2
AC Input and Regeneration – P3
Brake – P4
Motor – P5
Make sure the main voltage rating matches the drive specification.
Applying incorrect voltage may cause drive failure.
Do not apply power until all hardware connections are complete.
Safe Torque Off (STO) – P1
STO uses interface P1 on all CDHD 400/480 VAC models:
Safe torque off (STO) is a safety function that prevents the drive from delivering
power to the motor, which can generate torque.
STO Enable and STO Return must be connected to enable CDHD operation. The
STO Enable signal voltage must be 24 VDC.
Note : If the application does not require STO control, jumper pin 4 to pin 1,
and pin 3 to pin 2, to bypass the STO.
STO Bypass
STO Interface
Pin Pin Label Function
1 24V STO Enable
2 GND 24 VDC Return
3
4