Servonaut RX9, Технические характеристики, Страница: 21 / 32

18
Features
·
monitoring of battery voltage without
additional equipment
·
supports
Multikanal/Multiswitch/Multiprop
·
switch your model on and off
remote-controlled
· pass your model to another radio
within the Zwo4 system
· advanced settings via Servonaut
ProgCARD or radio HS12 and HS16
· add extra channels with channel
extender Zwo4R+3 and Zwo4R+7
Installation
Power supply
Usually the receiver is powered by a
speed controller with BEC. So the RX9
doesn’t have an distinct battery input.
But you can connect a receiver battery
to any servo output if you like, using a
y-cable if necessary.
Antenna (black cable)
Plastic truck cab: Place the antenna
inside the cab vertically facing up.
Metal truck cab: At least 3 cm of the
antenna should stick out at the top, e.g.
out of a drill hole.
Ship: The higher you can place the
receiver and antenna the better the
range. Wood or plastic parts don’t inter-
fere with reception.
Keept the antenna away from all metal
or carbon parts and other electronics.
Important: Don’t bend the antenna too
much.