Servonaut DiCa, Руководство пользователя

Страница: 27 / 32

27
4
5
Some modules show temperature
and overcurrent data. These are
only approximate values. Look for more
information in the manual of the con-
nected module.
If there is anything to customise a
short press on one of the white
buttons starts the setup menu of the
Servonaut module. Use short presses
on the white buttons to browse
between menu items.
Press and hold a white button to
change any setting. The changes
come to effect immediately. It might
take some seconds before the settings
are finally stored, so don’t turn of power
immediately.
3
4
5
To reset a menu item to factory preset
press and hold both white buttons.
Press the black button to leave this
menu and change the DiCa operating
mode.