Servonaut DiCa, Руководство пользователя

Страница: 20 / 32

20
Lipo test mode
Connect the battery balancer plug on
the right side, with the black i.e. minus
wire towards the front side. You may
use 2s, 3s or 4s batteries with a 3 to 5
pole connector.
Choose the battery type using the
two left buttons. It is very impor-
tant to select the right battery type, oth-
erwise the state of charge shown is not
correct.
Each full block of the battery sym-
bol stands for 20% amount of
charge. In case of a critical low voltage
the backlight will flash and a buzzer
sounds.
1
2 2
This row shows the voltages of
each battery cell.
Alternating display of total voltage
[V] and greatest voltage differ-
ence [mV] between the cells.
The voltage difference is a good indica-
tor for the battery condition and quality.
A loaded battery in good shape should
have a difference of 20mV or less and
the difference should not increase sig-
nificantly over storage time.
3
4
1 2
3
4