15
4
USAGE
Usage of Your Gas Burners
Manual Ignition and Controlling the Gas Burners;
To ignite one of the burner , approach a match, taper or another manual aid to its
upper circumference and push the corresponding conrol knob and turn it counter
clock-wise. Medium regulation of the flame will be obtained by turning the control
knob between maximum position (big flame) and the minimum position (small
flame).
The small diagrams situated on the control panel indicate which of the gas burners
is in use.
Electrical Ignition:
Electrical ignition of gas burners can be done in two ways; depending on the
configuration of your hob.
Ignition by Spark Button:
Press the hob valve you want to operate and turn the valve in the counter-
clockwise direction with your other hand, press the ignition button at the sometime.
Continue pressing the ignition button until you see a stable flame on the burner.
Ignition Through Hob Valve (microswitch):
Press the hob valve you want to operate and turn the valve in the counter-
clockwise direction. The microswitch placed under the knob will automatically
create sparks through the spark plug of the burner. Continue pressing the knob
until you see a stable flame on the burner.
If your hob is equipped with gas safety device;
Hobs equipped with flame failure device provide security in case of accidentally
extingnished flame. If such a case occurs, the device will block the burners gas
channels and will avoid any accumulation of unburned gas. Wait 90 seconds
before re-igniting an extinguished gas burner.
Necessary time period to arm the gas safety during ignition: max. 3 seconds.
Necessary time period to disarm the gas safety after the flame
extinguishes: Not more than 90 seconds.
•Push the control knob and turn it counter clockwise until it reaches maximum
flame position.
.
