8
F
ASTENING THE INSTALLATION
BRACKETS
• Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels.
• Turn the cooker top upside down and
fasten the brackets “A” which can be
connected to cooker in two different
position depending on fixture panel
thickness as shown in figure 3.5 or
3 . 6 t o t h e a p p r o p r i a t e
holes, without tightening the screws
“B” for the moment.
s c r e w
F
ASTENING THE COOKER TOP
•
• Insert the cooker top into the hole and
position it correctly. (Fig 3.2)
• Adjust the position of the brackets “A”
and tighten screws “B” to
the
fix
cooker top firmly in position (Fig 3.5,3.6)
INSTALLATION IN KITCHEN
CABINET
WITH DOOR
(Fig.3.7)
The distance between the bottom of the
hob and the fixture surface should be at
least 60mm.
Fig.3 .6
Fig.3 .4
B
A
T
t 25 mm
<
T
t
B
A
Fig.3. 5
T
t
T
t>25 mm
Fig.3 .7
6
0
m
m
C
Apply the one_sided self_adhesive sealing
tape ‘C’all the way round the lower edge of
the cooktop. Do not stretch it. ( Fig 3.4)
