• Ensure server is empty prior to removing spigot.
• Do not disassemble spigot while it is attached to
server.
• Do not submerge or pour water over electrical
housing.
CLEANING INSTRUCTIONS
DEVICE
MAINTENANCE
A
B
STEP 3: REMOVE SPIGOT BODY
(Spring pin returns to normal position
)
•Spigot seal assembly is removable. Do not remove spring from stainless
steel core.
•Silicone seal can be rinsed clean or replaced if necessary.
STEP 1: LIFT PIN. WHILE PIN IS HELD UP YOU WILL BE
ABLE TO ROTATE SPIGOT BODY
NOTE: CARE MUST BE TAKEN TO NOT DAMAGE SPIGOT SEAT
(Use a soft, non-abrasive cloth to clean)
STEP 2: ROTATE SPIGOT BODY COUNTER CLOCKWISE
TO REMOVE SPIGOT BODY
EXAMINE THE UNDERSIDE OF THE SPIGOT
Note the location of (A) spring loaded pull pin and
(B) alignment marks.
100009
(Patent pending)
1
100009
UP NEXT: CLEANING INSTRUCTIONS CONTINUED
