Serveredge SED-KLHDMI-0819 Скачать руководство пользователя страница 6

6

PRODUCT DESCRIPTION

PRODUCT FEATURES

INTRODUCTION

The 8/16-port USB Rack KVM Switch is a versatile device that allows administrators to access an 8/16 HDMI computer from a 

set of USB keyboards, mice,or a set of PS2 keyboards, mice, and consoles.

Provides four easy ways embodiment, the installation can be switched computer architecture: (1) connecting the port select 

buttons using a switch on the front panel; (2) a combination of the input from the keyboard hotkey; (3) from the screen display 

(OSD) on the menu select. The Auto Scan feature provides automatic scanning and monitors the computers in the installation 

architecture one by one. (4) Remote network control operation through the network port of the extended IP module to connect 

to the computer above the KVM.

This product is very quick and easy to install. Simply connect the cable to the appropriate port, no software setup, no 

complicated installation procedures, and no incompatibilities. Because the device can directly access the input data of the 

keyboard, it can operate on a variety of operating platforms (compatible with PC, Mac, Sun, etc.).

Since it is allowed to manage the computer connected to it from a single console,the installation of a group of KVMs, (1) can 

eliminate the expense of purchasing individual keyboards,monitors and mice for each computer; (2) saving the extra equipment 

will occupy Space; (3) saving energy costs; (4) avoiding the inconvenience and waste of moving back and forth between 

computers. (5)Rapidly upgrade to the remote network control mode of IP control mode.

A set of USB console controls 8 units or 16 units HDMI computer interface

The console supports USB TYPE A interface type keyboard and mouse device

LCD type KVM maximum resolution is 1920×1080@60HZ

Rack type KVM maximum resolution is 4K X 2K @60HZ

Switch the computer through the front panel buttons,keyboard hotkeys and screen menu(OSD)

The controlled device connected BIOS-level access,without fear of invasion risk of viruses and Trojans

The controlled computer does not need to install any software and drivers, and the controlled computer directly

recognizes KVM.

Scalable remote network control mode IP extension board

Support OSD to set user login mode and increase KVM login security requirements

Both local and remote IP modes support high video resolution support 480i, 480p, 720p, 1080i and 1080p(1920×1200),

4K X 2K Ultra HD resolution

Support widescreen resolution

Support DDC communication to adapt to different graphics devices

Auto scan function monitors all computer operations

Support for cross-platform operations- Windows, Linux, Mac*, and Sun*

The computer mouse and mouse connection port is controlled by Keep Online technology to simulate the mouse and

keyboard.The device is safe and stable,and the switching is fast without delay.

CHAPTER I

Содержание SED-KLHDMI-0819






























Отзывы: