15
EXTENSIVE APPLICATION OF DEVICE
The device could extend a interface of video ouput, via special video cable to connect VGA Display monitor; or as a input
interface of IP BOX. Connection way as following;
Note:
Please confirm the power failure status of the equipment before installation. To prevent equipment damage during
installation, please confirm that all installed equipment has good grounding protection.
Note:
Make sure all plugs are connected to the KVM port jacks of the same group(all are connected to port1,or all are
connected to port2).
SINGLE DEVICE INSTALLATION
1. Plug your USB keyboard and mouse into the USB console port on the switch’s back panel.
2. The HDMI display video signal line is connected to the HDMI control terminal port and powered.
3. Using a set of KVM cables of the model corresponding to this product, plug the HDMI connector into the HDMI port of any
available HDMI port area of the switch.
4. Plug the HDMI video connector and USB plug corresponding to the KVM cable into the corresponding port on the
computer.
5. Plug the power adapter included with this package into the AC power source, and then plug the other end of the power
adapter into the power jack on the switch.
6. Turn on your computer.
