10
STACKING AND INSTALLATION
STANDARD RACK MOUNTING(SINGLE RAIL SERIES)
HARDWARE INSTALLATION
1. Regarding the placement of LCD KVM important safety information switch has been listed in the Appendix in, please first
check the contents before operating.
2. Before installation, please make sure that all the devices you are connected to are powered off. You must unplug all the
computer power cords with keyboard power on function.
3. The package of the LCD KVM switch is stuffed with filler to protect the product during transportation. Please LCD module
in the subsidiary protective film and a filler, prior to filling out the installation.
The LCD the KVM switch can be placed on any suitable surface, and sufficient safety support apparatus plus additional cable
weight amount ; Confirm plane is clean and free of debris may affect other switch ventilation and normal operation.
1. Screw the front flange to the rack first. Slide the bars with
the rear flange towards the rack until the flanges make
contact with the rack, then screw the rear flanges to the
rack.
2. Slide the switch onto the support flanges. Use the screws
supplied with this package to loosely attach the front of
the switch to the front of the rack.
3. Slide the rear attachment sliding brackets along the slide
bars until they contact the rear of the switch.
4. Use the screws supplied with this package to attach
the bars to the rear of the switch.At this point, you have
completed the rack mounting of the LCD KVM switch for
subsequent use.
CHAPTER II
