Page 6
ASSEMBLY
PRACTICE SAFETY. WASH ALL PARTS
PROPERLY BEFORE USE.
See page 4.
INSTALL SEAL
onto head assembly piston.
Apply small amount of food
equipment lubricant inside seal.
TIP:
Flared end of seal must face down.
1
INSTALL PINCH VALVE
TIP:
Squeeze the pinch valve open
before installation to ensure it isn’t
stuck shut.
Install pinch valve into bottom of piston.
Press pinch valve securely to seal end.
2
INSERT SPRING
INTO CYLINDER
3
SNAP!
OPTIONAL:
ADD GAGING COLLAR
(if included) to reduce portion size.
OPTIONAL:
ADD EXTENSION TUBE
(if included) to bottom of cylinder if extra length
will be needed to reach product
at bottom of container.
SNAP CAP
ONTO CYLINDER
Press firmly to secure cap down
over all threading on cylinder.
4
