Page 4
Manual #EM_01912_RevC 032222
TAKE-DOWN
PRESS SWITCH
to the “OFF” position.
1
EMPTY WATER FROM
WATER VESSEL BASIN
after each use.
Carefully pour water down a drain.
5
DRY
thoroughly with a soft dry cloth.
6
REMOVE BOTTLES
3
REMOVE BOTTLE SUPPORT
4
UNPLUG CORD
2
CAUTION- HOT
Allow unit to cool or
take proper care with hot surfaces.
TIP:
Remember to
empty
the water
each day rather than
add
—
This will greatly extend the life of
your warmer.
Proper drying after each use helps
maintain the stainless steel.
NEED HELP?
Please be prepared with your Model, P/N and
Series located on the lid or base of the unit.
Example:
262.628.5600 | 800.558.8722
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
MODEL
XXXX
P/N
#####
SERIES
##X ##X
SERVER PRODUCTS
LIMITED WARRANTY
This Server product is backed by a two-year
limited warranty against defects in materials and
GENERAL SERVICE,
REPAIR OR RETURNS
Before sending an item to Server Products, contact Customer Care to
request a Return Authorization Number. The RA Number ensures proper
processing and a prompt turnaround. Repaired units are typically shipped
out within 48 hours of receipt.
Merchandise returned for credit will incur a 20% restocking charge, must
be less than 90 days old, and in unused (new) condition. Electrical parts
(thermostats, heating elements, etc.) are not returnable.
Servicing Cord: Specific tools are required for safe and proper power
supply cord removal and installation. Repairs should be done by an OEM
representative or qualified technician using a cord meeting code H05
RN-F requirements.
